Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. Although not completely eliminated, risks today have been reduced. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. The OSHA requires that utilities underground first be located before digging through a piece of land. Otherwise it can be something disastrous. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. It is said that every 6 minutes, there is a utility line that is struck. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. This has made it easier to locate utility lies underground and other important things. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. Below are some of the colors used for different utility lines.

White lines are for proposed excavation sites. Area that will be excavated in the future are marked.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! You can view here for more.